PDH 4 T1/E1 fiber multiplexer MUX WDM BiDi B single fiber strand 20Km, AC power

Description

Product description
The appeal of FMUX04 is not only its small size, neither its availability of
both
E1 and T1 interfaces on the same equipment, nor the various optical versions that can be chosen, but the ability to be remotely managed through SNMP protocol, while all the T1/E1 muxing performance is kept at a very low price.
The unit is a PDH fiber multiplexer with 4 selectable E1/T1 interfaces and one optional orderwire port for telephone communication
and service.
FMUX04
ha
s only 1U height and occupies half of an 19" chassis width. The strength of FMUX04 is the ability to support installation of an optional SNMP management module, thus offering to customers the ability to build manageable E1/T1 networks at a fraction of the cost.
FMUX04 is perfectly suitable for either fixed or mobile telephone operators seeking to migrate to fiber and extend their network coverage. Its small capacity makes it a perfect choice for rural areas, as well as low density residential. System integrators or small service providers can also rely on FMUX04 to establish T1 private circuits over fiber optics.
The
FMUX04
has only one fixed fiber optic port, but choices for it are large: from multimode optical connections operating on 2Km fiber distance up to 120Km for singlemode or 60Km on WDM single strand fiber connections. FMUX04 accommodates easily in either telco site or datacenter, being available on demand with DC power supply instead of usual AC power unit.
The most valuable feature of the FMUX04 is the centralized management through SNMP.
FMUX04-SNMP
is an optional module, that allows management based on the SNMP protocol. An MIB file is provided for integration in most Network Management Systems (NMS) available on market. Ther is also a free GUI for Windows application that allows independent management of a limited number of FMUX04 units (up to 20) for one data center.
Features
Standalone unit (1U, 1.75"). An optional mounting kit
is available for single or side-by-side mounting in a 19" rack
Channel service setting and remote loop-back setting via front
panel DIP switch
Far End Fault (FEF) on fiber link, selectable
On-line Bit Error Rate monitor feature with four error-rate classes
Provides 2 color based LEDs on front panel
Provides one optional dedicated order wire phone port,
(FXS, RJ-11 port)
Provides one supervisory port (DB9 connector) for ASCII terminal
and one alarm relay contact
SNMP management (Optional) with additional support
for Telnet or Web based local or remote configuration
WDM single strand Singlemode fiber link distance up to 20Km, Tx:1550nm/Rx:1310nm
Supports SC type optical connector
System BER <= 10-11
Product Specifications
Console interface
RS-232D (RJ-45) Asynchronous
Bit rate 19200,8N1
System performance
BER<=10^-11
Alarm
Single relay contact
LEDs
Power, Optical, Minor & Major Alarm, Far End and Near End Error, System Failure E1&T1 signal status
Power
FMUX04-AC
Internal PSU,
AC input: 100 — 240 VAC±10%; Frequency: 50 — 60Hz
FMUX04-DC
Internal PSU DC input: 20 — 60 VDC
Environment
Temperature
0 — 55°C (Operating)
0 — 70°C (Storage)
Humidity
up to 90% non-condensing
Power Consumption
FMUX04
20W
Dimensions(WxDxH)
FMUX04
195mm x 45mm x 255mm
Weight
FMUX04
850g
Compliance
FCC, Part 15, Sub B (Class A) European
standard EN55022:
1994/A1 : 1995/A2 : 1997 Class A,
EN61000-3-2:1995, EN61000-3-3:1995
and EN50082-1:1997
MTBF
58,000 hours
Important note:
The WDM B type FMUX04 equipment works only in pair with another FMUX04 multiplexer equipped with WDM A type optical module. The complementary multiplexer with WDM A type module is also available on our eBay store.